Concrete Choreography
A forest of 3D-printed concrete columns, 2.7 m tall and printed without formwork, designed as the stage set for a dance performance at the Origen Festival in Riom. MAS ETH DFAB group project.
- Year
- 2019
- Location
- Origen Festival, Riom, Switzerland
- Institution
- ETH Zürich: Digital Building Technologies, MAS ETH in Architecture and Digital Fabrication
- Client
- Origen Foundation
- Collaborators
- Ana Anton (tutor), Patrick Bedarf (tutor), Angela Yoo (tutor), MAS ETH DFAB 2018/19
- Category
- Large-Scale 3D Printing, Robotic Fabrication, Computational Design, Material Research
- Role
- Group project, MAS ETH DFAB 2018/19

Project
Concrete Choreography is a forest of columns designed as the scenery for a dance performance at the Origen Festival in Riom, Switzerland, in 2019. Nine columns stand outside, and three more were designed for the interior of the barn. The project was a group project of the MAS ETH in Architecture and Digital Fabrication 2018/19 at Digital Building Technologies, and was also shown in the exhibition Design Labor: Material + Technik at the Museum für Gestaltung Zürich.
Design
Two design applets were developed in Processing. The outside columns are based on sine curve functions, while the inside columns are based on mesh subdivision. Several material explorations, including overhang tests, variable layer heights, textures and pigmentation, were used to integrate ornament into the columns and to explore the limits of fabrication.
Fabrication
The columns were 3D printed with a fluid concrete mix in one continuous extrusion, reaching a height of 2.7 m without formwork. This height was made possible by the robotic setup. According to Digital Building Technologies, each column took about 2.5 hours to print, with a 1.6 km print path, a layer width of 25 mm and a layer height of 5 mm.
The fabrication process followed several steps: curvature analysis, slicing in Grasshopper, integration of the inner core, rendering, robotic simulation and concrete printing. The concrete bases were prefabricated, the columns were printed directly on top of them, and the inner core was then filled with concrete and structural reinforcement.
Credits
Tutors: Ana Anton, Patrick Bedarf, Angela Yoo.
MAS ETH DFAB 2018/19: Yuta Akizuki, Jesus Barney, Ying-Shiuan Chen, Chaoyu Du, Nik Eftekhar Olivo, Nicolas Feihl, Rahul Girish, Noor Khader, Sofia Michopoulou, Aya Shaker, Eleni Maria Skevaki, Yoana Taseva, Keerthana Udaykumar, Jonas Van den Bulcke, Wenqian Yang.
Origen Foundation: Giovanni Netzer, Irene Gazzillo, Guido Luzio, Flavia Kistler.
Research partners: Prof. Robert J. Flatt, Lex Reiter, Timothy Wangler (Physical Chemistry of Building Materials, ETH Zürich).
Technical support: Michael Lyrenmann, Philippe Fleischmann, Andreas Reusser, Heinz Richner, Tobias Hartmann.
Sponsors: Debrunner Acifer Bewehrungen AG, LafargeHolcim, Elotex, Imerys Aluminates. Supported by the NCCR Digital Fabrication, funded by the Swiss National Science Foundation.












Photos: Benjamin Hofer, Andrei Jipa, MAS ETH DFAB 2018/19 team