Nik Eftekhar Olivo

Projects

The Flow installation in the timber atrium of the BMW Talent Campus: coloured printed modules suspended between the beams.

Flow

2026 · Large-Scale 3D Printing, Computational Design, Robotic Fabrication, Material Research
Interior of the Glatsch pavilion: a coloured cupola of 3D-printed panels suspended within the timber structure.

Glatsch

2025 · Large-Scale 3D Printing, Robotic Fabrication, Prototypes and Demonstrators, Computational Design
Floor-to-ceiling prototype: two doubly-curved HC3DP panels welded into one pane and held in a prefabricated mullion system.

Prefabricated Connections for HC3DP Facades

2025 · Large-Scale 3D Printing, Material Research, Prototypes and Demonstrators
A Hollow-Core 3D-printed panel in recycled PETG in front of the robotic printing setup.

Thermally Enhanced HC3DP Nozzles

2024 · Material Research, Large-Scale 3D Printing, Computational Design
Overview of the Ecoalf store interior: translucent 3D-printed walls with integrated shelving surround a printed counter and display table.

Ecoalf Store

2023 · Architecture and Design, Large-Scale 3D Printing, Computational Design
Prōtóplasto in a dark underground space: three illuminated 3D-printed columns carrying white space-frame roofs.

Prōtóplasto

2023 · Large-Scale 3D Printing, Robotic Fabrication, Prototypes and Demonstrators, Computational Design
Meeting room with a continuous ribbed 3D-printed surface curving from the wall into the ceiling.

Almagro Offices

2022 · Architecture and Design, Large-Scale 3D Printing, Computational Design
The white 3D-printed dome shell in a Zürich street, with a classic Cadillac convertible parked beside it.

Cadillac Pavilion

2022 · Large-Scale 3D Printing, Computational Design, Architecture and Design
The cake shop interior: a translucent 3D-printed curtain wall runs along the counter, lit from behind.

La Tarta

2022 · Architecture and Design, Large-Scale 3D Printing, Computational Design
Tree.ONE installed in the atrium of Hyundai Motorstudio Busan, a 10 m tall printed trunk rising into a branching canopy.

Tree.ONE

2022 · Large-Scale 3D Printing, Robotic Fabrication, Prototypes and Demonstrators
The 3.6 m sculpture in graded blue next to the ABB robot and extruder that printed it at Nagami.

Plasticity

2021 · Large-Scale 3D Printing, Robotic Fabrication, Material Research
The Throne, a white 3D-printed portable toilet, standing on a wooden deck in an Alpine landscape.

The Throne

2021 · Large-Scale 3D Printing, Computational Design, Prototypes and Demonstrators
A robotically fabricated Mesh Mould steel mesh with a doubly curved surface.

Mesh Mould Prefabrication

2020 · Robotic Fabrication, Computational Design, Prototypes and Demonstrators
The assembled arch standing on a pallet outside a timber building, seen in perspective.

Foam-Cast Arch

2019 · Computational Design, Material Research, Prototypes and Demonstrators
The nine 3D-printed concrete columns lit at night in front of the barns of Riom, with the mountains behind.

Concrete Choreography

2019 · Large-Scale 3D Printing, Robotic Fabrication, Computational Design, Material Research
The full-scale 3D-printed facade prototype in front of a window, seen from the front and from both sides.

3D-Printed Composite Sandwich Facade

2019 · Large-Scale 3D Printing, Computational Design, Material Research, Prototypes and Demonstrators
Up-Sticks in the Hello, Robot exhibition at V&A Dundee: a continuous, curving pavilion of timber slats.

Up-Sticks

2019 · Robotic Fabrication, Computational Design, Prototypes and Demonstrators
The Tree Table: slender metal rods branching through 3D-printed nodes up to three round surfaces at different heights.

Tree Table

2018 · Computational Design, Prototypes and Demonstrators