Nik Eftekhar Olivo

Plasticity

A 3.6 m tall sculpture designed by Niccolò Casas for the Italian Pavilion at the Venice Biennale, robotically 3D printed at Nagami in one continuous print from ocean plastic recovered by Parley for the Oceans, with a colour gradient from blue to white and back.

Year
2021
Location
Italian Pavilion, 17th International Architecture Exhibition, La Biennale di Venezia, Italy
Institution
Nagami Design
Client
Niccolò Casas
Collaborators
Niccolò Casas (design), Parley for the Oceans (material)
Category
Large-Scale 3D Printing, Robotic Fabrication, Material Research
Role
Adaptation of the design for printing, computational internal reinforcement, colour batch calculation and print supervision
The 3.6 m sculpture in graded blue next to the ABB robot and extruder that printed it at Nagami.

Project

Plasticity is a 3.6 m tall sculpture designed by Niccolò Casas for the Italian Pavilion, Resilient Communities, at the 17th International Architecture Exhibition of La Biennale di Venezia in 2021, on view from 22 May to 21 November 2021. It was robotically 3D printed at Nagami in PETG made from Parley Ocean Plastic, recovered entirely from plastic waste collected on coasts and in the sea, and at the time it was the largest structure designed with this material.

Fabrication

The original design was adapted into a printable geometry, checked through mesh curvature analysis. The sculpture was printed with an ABB IRB 6700 in a single continuous print that took three days. Different types of internal reinforcement were added computationally. Among them, an internal corrugated layer introduces ribs along the whole height of the sculpture, from the base to the top, so that flat areas neither crack nor deform. The perimeter of the base was thickened and covered on the outside with a skirting.

The colour gradient, from blue towards white and back to blue, was applied manually during the print. All colour batches were calculated in advance so that the transition would follow the intended gradient.

My contribution

Adaptation of the design into a printable geometry, computational design of the internal reinforcement, calculation of the colour batches for the gradient, and supervision of the print.

Credits

Client and design: Niccolò Casas.

Material: Parley for the Oceans.

Robotic fabrication: Nagami.

Links

← All projects